This paper reviews the technical behaviour defined for a specific control method, grid-forming control, used in inverter-integrated power generation sources such as wind power plants, solar power plants, and battery energy storage systems. Considering the growing trend of offshore wind power plants, the paper adapts the behaviours into offshore wind power applications; re-classifies them into mandatory, optional, and advanced categories; and provides testing methods to assess these behaviours.

As longer wind turbine blades are designed, concern about vortex-induced vibration (VIV) grows. This study identifies a new intermittent vortex-shedding behaviour through a long-time simulation of a 3D wind turbine airfoil. This finding motivates a novel evaluation of airfoil vibrations at different inflow velocities. Our results show that both 2D and 3D simulations predict similar VIV characteristics during large motions, enhancing our understanding and prediction of VIV in turbine blades.

This study examines regenerative wind farming with multirotor systems fitted with atmospheric boundary layer control (ABL-control) wings near the rotor's wake. These wings create vortices that boost vertical momentum transfer and speed up wake recovery. Results show that ABL-control wings can restore 95 % of wind power within six rotor diameters downstream, achieving a recovery rate nearly 10 times faster than that without ABL control.

The US offshore wind industry is growing rapidly. Expansion into cold climates will subject turbines and personnel to hazardous icing. We analyze the 21-year icing risk for US east coast wind areas based on numerical weather prediction simulations and further assess impacts from wind farm wakes over one winter season. Sea spray icing at 10 m can occur up to 67 h per month. However, turbine–atmosphere interactions reduce icing hours within wind plant areas.

Lidars are vastly used in wind energy, but most users struggle when interpreting lidar turbulence measures. Here, we explain the difficulty in converting them into standard measurements. We show two ways of converting lidar to in situ turbulence measurements, both using neural networks: one of them is based on physics, while the other is purely data-driven. They show promising results when compared to high-quality turbulence measurements from a tall mast.

Next-generation wind turbines are the largest rotating machines ever built, experiencing local flow Mach where the incompressibility assumption is violated, and even transonic flow can occur. This study assesses the transonic features over the FFA-W3-211 wind turbine tip airfoil for selected industrial test cases, defines the subsonic–supersonic flow threshold and evaluates the Reynolds number effects on transonic flow occurrence. Shock wave occurrence is also depicted.

Offshore wind farms will be built along the East Coast of the United States. Low-level jets (LLJs) – layers of fast winds at low altitudes – also occur here. LLJs provide wind resources and also influence moisture and pollution transport, so it is important to understand how they might change. We develop and validate an automated tool to detect LLJs and compare 1 year of simulations with and without wind farms. Here, we describe LLJ characteristics and how they change with wind farms.

In wind energy, precise wind speed prediction at hub height is vital. Our study in the Dutch North Sea reveals that the on-site-trained random forest model outperforms the global reanalysis data, ERA5, in accuracy and precision. Trained within a 200 km range, the model effectively extends the wind speed vertically but experiences bias. It also outperforms ERA5 corrected with measurements in capturing wind speed variations and fine wind patterns, highlighting its potential for site assessment.

The need for renewable energy, thus more efficient wind turbines, is ever increasing. Accurate prediction of the performance in the design stage is necessary. In particular, predicting the dynamic performance of a wind turbine in the region where it undergoes highly unsteady flow is very challenging. We investigated the dynamic performance of an airfoil, which is typical for megastructure wind farms, in support of the development of more efficient design tools in the future.

This paper provides a comparison of three well-established controllers. The benchmark considered is an airfoil section equipped with local control systems. The objectives are to track the blade lift set by the operator and to test its robustness when a perturbation arises. Differences between controllers are underlined in terms of needed effort and quality of the tracking.

This study investigates dynamic displacement estimation using double-time-integrated acceleration signals for future application in load monitoring based on accelerometers. To estimate displacements without amplitude distortion, a tilt error compensation method for low-frequency vibrations of tower structures using the static bending line without the need for additional sensors is presented. The method is validated using a full-scale onshore wind turbine tower and a terrestrial laser scanner.

Knowing the loads applied to wind turbine gearboxes throughout their service life is becoming increasingly important as maintaining reliability with higher torque density demands is proving to be challenging. Operational deflection shapes identified from fiber-optic strain measurements have enabled the estimation of input torque, improving the assessment of the consumed life. Tracking operational deflection shapes recursively over time can potentially be used as an indicator of fault detection.

This study investigates how wind turbine blades damaged by erosion, along with changing wind conditions, affect power output. Even minor blade damage can lead to significant energy losses, especially in turbulent winds. Using simulations, it was discovered that standard power data analysis methods, including time averaging, can hide these losses. This research highlights the need for better blade damage detection and careful wind data analysis to optimise wind farm performance.

This study explores how wind and power predictions can be improved by introducing local forcing of measurement data in a numerical weather model while taking into account the presence of neighboring wind farms. Practical implications for the wind energy industry include insights for informed offshore wind farm planning and decision-making strategies using open-source models, even under adverse weather conditions.

This research integrates custom sensors into wind turbine simulation models for improved performance monitoring utilising a turbine performance integral (TPI) method developed here. Real-world data validation demonstrates that appropriate sensor selection improves wind turbine performance monitoring. This approach addresses the need for precise performance assessments in the evolving wind energy sector, ultimately promoting sustainability and efficiency.