Preprints
https://doi.org/10.5194/wes-2026-164
https://doi.org/10.5194/wes-2026-164
17 Nov 2026
 | 17 Nov 2026
Status: this preprint is currently under review for the journal WES.

Correlating wake-model performance to the atmospheric state: a SCADA-based analysis at two offshore wind farms

Maxime Lejeune, Lukas Vollmer, Nicolas Coudou, Leonardo Alcayaga, and Wim Munters

Abstract. Engineering wake models are routinely validated against SCADA measurements with discrepancies between predicted and observed power often attributed directly to limitations in the wake model itself or to inadequate calibration. Wind farm power assessment however involves a sequence of processing steps, of which wake modelling is only the final stage. Disagreement between predictions and observations may therefore stem from the wake-model physics itself but also from the software implementation, the reconstructed inflow, or the atmospheric conditions sampled.

This work aims to assess these different contributions independently by evaluating the entire wake modelling chain, from wind-resource assessment to the final power estimation. SCADA data from two offshore wind farms, Westermost Rough and Anholt, are processed using two independently developed filtering workflows and complemented with profiling LiDAR measurements and 1 km-resolution WRF simulations. The resulting inflow conditions are used to drive two wake models, Jensen and TurbOPark, both sensitized to the ambient turbulence intensity. Three wake-modelling software packages are considered (FLORIS, PyWake, and FOXES) while WindIO is used to ensure identical inputs across all implementations.

The two SCADA-filtering workflows yield nearly interchangeable wind speed timeseries (bias ≤ 0.04 m s−1, r ≈ 1), but differ in wind direction by up to 7.27° at Anholt, likely due to differences in northing calibration procedure. For identical inputs, software implementation alone produces bias spreads of up to 4 % for TurbOPark, comparable to the effect of the wake-model choice itself, while Jensen remains consistent across packages. Farm-level bias is further shown to be an insufficient performance indicator that should therefore be complemented by additional metrics such as farm-level RMSE, correlation, and turbine-level statistics. Indeed, bias compensation can lead to near-zero farm-wide biases that hide binned farm-mean errors of ±5 % and farm-MAE exceeding 20 % under very stable or strongly heterogeneous inflow conditions. At the turbine-level, the analysis highlights the need to account for local wind speed gradients when evaluating individual turbine power, establishing clear spatial correlation between wind speedup maps and turbine power error spatial distribution.

Overall, these results support a shift away from AEP-based validation toward time-series or condition-binned approaches. They additionally motivate a better inclusion of physical phenomena such as heterogeneity-aware models. They finally call for better community standards, through, e.g. the development of shared standards such as WindIO.

Publisher's note: Copernicus Publications remains neutral with regard to jurisdictional claims made in the text, published maps, institutional affiliations, or any other geographical representation in this paper. While Copernicus Publications makes every effort to include appropriate place names, the final responsibility lies with the authors. Views expressed in the text are those of the authors and do not necessarily reflect the views of the publisher.
Share
Maxime Lejeune, Lukas Vollmer, Nicolas Coudou, Leonardo Alcayaga, and Wim Munters

Status: open (until 15 Dec 2026)

Comment types: AC – author | RC – referee | CC – community | EC – editor | CEC – chief editor | : Report abuse
Maxime Lejeune, Lukas Vollmer, Nicolas Coudou, Leonardo Alcayaga, and Wim Munters
Maxime Lejeune, Lukas Vollmer, Nicolas Coudou, Leonardo Alcayaga, and Wim Munters
Metrics will be available soon.
Latest update: 17 Nov 2026
Download
Short summary
Wind turbines slow the wind behind them resulting in large power losses at the farm level, especially for the large multi-GW offshore farms. Limiting these so-called wake losses requires simplified models that estimate how much energy is lost. Using operating data from two offshore wind farms, we show that the accuracy of such models depends strongly on the weather, but also on which software package runs them. This confirms that shared community standards are needed alongside better physics.
Share
Altmetrics