Your paper "An innovative method to calibrate a spinner anemometer without use of yaw position sensor " has been now reviewed by three reviewers.
Their comments essentially converge over the following points:
1) Formatting: The paper needs drastic formatting improvements in terms of the quality of figures, clarification and definition of notations, clarification of terms in equations, explanation and consistency in symbols.
2) Clear clarification and in depth commenting on the influence of the flow non-uniformity (both in terms of constancy and inflow tilt and inclination angles) on the proposed method. If possible reference measurements should be provided to sustain your comments
3) an improvement in the Introduction with better background information

Once all these are integrated in the manuscript and after final review the paper can be considered for publication

At this point it seems that the great majority of the points raised by the reviewers have been addressed. Therefore the manuscript has improved.