The terminology in meteorology can sometime cause confusion for wind turbine design engineer, such as inflow angle in on page 6, line 3, please specifiy what is the definition here, as inflow angle is understood as angle formed by the tangential velocity and the wind velocity with respect to the airfoil of the blade. 

Equation 10, why is unit of P1 is hPa and P2 is  meter

Page 12 in section 4.3.1 Site 1, it refers to Figure 4, should it be Figure 5? 

Please mention how the wind direction is defined so that there is no misunderstanding.

For wind turbine design parameters for the turbulence model will be needed, can the authors provide some guidance how to translate the results of the paper into practical wind field generation to determine the loading of the wind turbine during TC, besides wind shear. Since  misalignment between the wind direction and nacelle position as well as the rotor position have strong impact on the ultimate loading, can the TC model provide statistically guided values for the simulation. This can be extended to power spectra, coherence model that can be applied in a wind field simulation that capture the characteristics of TC.